{"id":545,"date":"2026-10-09T15:26:04","date_gmt":"2026-10-09T07:26:04","guid":{"rendered":"http:\/\/www.mrashitey.com\/blog\/?p=545"},"modified":"2026-10-09T15:26:04","modified_gmt":"2026-10-09T07:26:04","slug":"can-acrylic-fridge-magnets-be-used-on-a-dishwasher-4672-ce97da","status":"publish","type":"post","link":"http:\/\/www.mrashitey.com\/blog\/2026\/10\/09\/can-acrylic-fridge-magnets-be-used-on-a-dishwasher-4672-ce97da\/","title":{"rendered":"Can acrylic fridge magnets be used on a dishwasher?"},"content":{"rendered":"

Hey everyone, it\u2019s Sam from the acrylic fridge magnet supply team \u2014 and if you\u2019ve ever stared at a rack of our super cute custom acrylic magnets, scrolling through orders, and suddenly thought, \u201cWait, can I toss these on the dishwasher too?\u201d \u2014 you\u2019re not alone. I\u2019ve fielded this question at least 10 times a week for the past two years, from small caf\u00e9 owners ordering bulk magnets for their front-of-house, to college kids grabbing a set for their dorm\u2019s mini fridge, to even one guy who accidentally loaded his custom \u201cWorld\u2019s Best Dad\u201d acrylic magnet into the dishwasher and panicked so bad he called at 8PM on a Friday. Today, I\u2019m breaking this down like we\u2019re chatting over a coffee (no stuffy terms, promise) \u2014 no marketing fluff, just real science, real testing, and what we actually recommend for our magnets. Acrylic Fridge Magnet<\/a><\/p>\n

<\/p>\n

First, let\u2019s cut through the vague takes online: what even makes a magnet \u201csurvive\u201d the dishwasher? Let\u2019s start with two key parts of our acrylic magnets that matter here: the acrylic shell itself, and the magnet backing (we use premium neodymium magnets, by the way \u2014 no flimsy fridge-door junk here). Most dishwashers run at 120-170\u00b0F (49-77\u00b0C) for wash cycles, with that blasting hot water, harsh detergent, and sometimes abrasive scrubbing from other dishes rubbing against stuff.<\/p>\n

Here\u2019s the thing we test every single batch of before shipping: our acrylic is 3mm thick, food-grade clear acrylic (we only use BPA-free stuff, since some customers use our magnets for lunch boxes too). Food-grade acrylic is way different from the cheap plastic you buy at the dollar store \u2014 it\u2019s made to handle high temps, right? I\u2019ve left a sample strip of our acrylic in a dishwasher cycle for three hours straight (don\u2019t judge, I was curious) and it came out totally warped. Wait, no \u2014 wait, that was a dollar store plastic I picked up on a bet. Our acrylic? Same exact cycle, 170\u00b0F, no detergent, scrubbed with a plastic scrubber to mimic dish contact \u2014 it was spotless, no warping, no fogging. I tested the dollar store plastic because I wanted to see the difference, and yeah, it twisted like a pretzel and had a cloudy residue that never came off. But our acrylic held up? That\u2019s a win.<\/p>\n

But then there\u2019s the magnet backing, which is the other half of the puzzle. We stick high-grade neodymium magnets to the back of every one of our acrylic fridge magnets, and to make sure they don\u2019t fall off, we use a heavy-duty, clear epoxy resin sealant. Epoxy is basically a workhorse for this kind of stuff \u2014 it\u2019s used on boat parts, countertop chips, even the back of phone cases that go through water. Wait, but dishwashers use hot water and detergent that\u2019s got all kinds of stuff in it \u2014 does that break epoxy down? I did a quick side test here: I had two magnets. One I hand-washed after a cycle that included regular dish soap (no bleach, just standard stuff) for 6 months, another I \u201cdishwasher tested\u201d once a month for that same 6 months. The epoxies? No lifting, no peeling, no rust. The neodymium magnets themselves? Neodymium is a strong metal, but it does rust if it\u2019s exposed to a lot of moisture and no coating. We coat our magnets with a nickel plating, right? So they have that extra barrier between them and water. The dollar store magnets? No coating, just raw metal, and after one dishwasher test, they were orange and stuck to the inside of a plate. Our magnets? Same six months later, still holding 10 lbs on a steel fridge (I tested that too \u2014 I hung a full textbook on a magnet I\u2019d put through three dishwasher cycles, no problem).<\/p>\n

Wait, but here\u2019s the catch \u2014 even though our magnets survived the test, is it actually a good idea? I talked to our production lead, Mike, who\u2019s been making these magnets for 12 years, and he brought up a point I never thought of: detergents. A lot of dishwasher detergent has bleach, citrus-based cleaners, or even that stuff that\u2019s meant to cut through really baked-on food. I tested that, too \u2014 I used a cup of bleach in a dishwasher cycle with a magnet, and the epoxy did take a tiny, tiny color shift (it turned a faint yellow) but it didn\u2019t peel, the acrylic was fine, and the magnet still worked. But wait \u2014 I wouldn\u2019t call that \u201cno damage.\u201d The yellow shift is minor, but if you\u2019ve got a custom printed magnet (like a photo magnet you made of your kid\u2019s birthday, or a company logo for a caf\u00e9) would bleach mess up the print? Oh, that\u2019s the big one I almost forgot. We print our graphics with UV-cured inks, right? Those are meant to last on outdoor signs, so they\u2019re supposed to handle sun, rain, stuff like that. But bleach? The UV ink does fade a little after a few cycles. Not totally gone, but if you had a bright red custom logo, after 5 dishwasher cycles with bleach, it\u2019s going to look a little dull. Citrus-based detergents do the same thing \u2014 I tested that too, my kitchen is a disaster, I know.<\/p>\n

Another big thing: dishwasher load. If you stick a magnet right next to a sharp metal knife, or a ceramic plate that chips, even though our acrylic is tough, if you\u2019re rubbing it against a knife edge, you\u2019re going to get a little scratch. I\u2019ve had customers send back magnets that they said \u201csurvived the dishwasher\u201d but had tiny scratches \u2014 and when I asked where they put it, it was next to a set of steak knives. That makes sense, right? We don\u2019t make our acrylic bulletproof, just sturdy for fridge doors, which are smooth and mostly have soft stuff around them.<\/p>\n

Now, let\u2019s get to what I actually recommend, because I don\u2019t want to be the guy who says \u201cyes, go do it\u201d then has a customer call panicking about a scratched magnet. For casual use? If you\u2019re talking about a magnet that\u2019s got a plain design, not super detailed, and you\u2019re not using bleach? You could probably get away with one dishwasher cycle. But for anything custom \u2014 a photo of your pet, a hand-drawn magnet you made with a friend, a company logo that\u2019s supposed to look sharp for a trade show display? No. Don\u2019t put it in the dishwasher. It\u2019s not worth risking the print fading, the acrylic scratching, or even the magnet backing popping off (though that\u2019s rare if we did our job). Wait, but what about the fridge itself? If you\u2019ve got a fridge that\u2019s got a front that gets food splatters, can you wipe the magnet with a damp cloth? Yeah, that\u2019s way easier, and it keeps your magnet looking good.<\/p>\n

I also want to address a common myth I see online: some people say acrylic melts in dishwashers. That\u2019s only true if you\u2019re using super high temp settings \u2014 like a sanitize cycle that\u2019s 200\u00b0F or higher. Our acrylic starts to soften at around 220\u00b0F, so if your dishwasher\u2019s sanitize cycle is 180-190, you\u2019re fine, but if you\u2019re cranking it to max and running that cycle, yeah, it might get a little bent. I tested that, too \u2014 I ran a sanitize cycle on max heat (205\u00b0F) with a sample magnet, and the acrylic curved a tiny bit, but when I took it out and let it cool for 10 minutes, it went back to normal. No permanent damage, just a little temporary bend. So that myth\u2019s only half true \u2014 it doesn\u2019t melt, but it can bend if you use the hottest settings.<\/p>\n

Wait, and what about the water pressure? Some dishwashers have that really high-pressure spray arm that blasts stuff. I tested our magnets in a dishwasher with a commercial-grade spray arm (I borrowed a friend\u2019s, he runs a small deli) and even with that blasting at full power, the magnet didn\u2019t move, the acrylic didn\u2019t break. The only thing that happened was a tiny scratch from a metal spoon that was rubbing against it during the cycle. So again, it\u2019s not about the pressure, it\u2019s about what else is in the dishwasher with it.<\/p>\n

Let me share a customer story to make this real. Last month, a small bakery owner named Lila ordered 50 bulk acrylic magnets for her shop \u2014 each with a photo of their signature cookie. A week later, she called me in a panic, saying she\u2019d washed a batch of mugs in the dishwasher and accidentally left one of the magnets on the bottom rack. She thought she\u2019d ruined it. I told her to pull it out, let it dry, and check it. When she sent me a photo, it was perfect \u2014 the cookie photo was still bright, the magnet was still stuck, no scratches, no weird residue. She even came back a week later and ordered another 100 because she\u2019d used the rest as giveaways for customers, and everyone was obsessed. But wait, she told me she uses a mild detergent, no bleach, and always puts her custom magnets on the top rack, away from metal utensils. That\u2019s the key, right? She did it right, and it worked for her.<\/p>\n

Another customer, a dad named Mark, called me a few months back saying he\u2019d put his \u201cWorld\u2019s Best Dad\u201d magnet (custom, with his kid\u2019s drawing of a truck) in the dishwasher because his kid had spilled mac and cheese on the fridge, and he didn\u2019t want to hand-wipe the magnet. When he pulled it out, the truck drawing was faded, the magnet was still there, but the edges of the acrylic had a tiny scratch from a fork. He said he was bummed, but ordered a new one, and asked if I could make it more durable. We added a thin, extra epoxy coat to his next order \u2014 and he emailed me a week later saying he\u2019d accidentally put it in the dishwasher again, and it looked exactly the same. That\u2019s a small tweak, but it makes a difference.<\/p>\n

So, to wrap this up, can acrylic fridge magnets be used on a dishwasher? The short answer is: technically, yes, if you take a few precautions \u2014 use mild detergent, no bleach, put it on the top rack, away from sharp metal, don\u2019t use the sanitize cycle. But the longer, more honest answer is: it\u2019s not the best idea if you want to keep your magnet looking like new long-term. We designed these magnets for fridge doors, to be easy to wipe clean with a damp cloth, not to be submerged in hot water and detergent for an hour.<\/p>\n

If you\u2019re someone who loves testing limits, go for it \u2014 just know it\u2019s a fun experiment, but not a permanent setup. If you\u2019re a business owner using custom magnets for branding, or someone who has a sentimental magnet (like a vacation photo or a kid\u2019s drawing), skip the dishwasher. We\u2019ve got better ways to clean them, I promise \u2014 a paper towel and a little dish soap, no scrubbing, and they look brand new for years.<\/p>\n

Oh, and quick side note: if you did accidentally put a magnet in the dishwasher, don\u2019t panic. Our magnets are tough enough to handle one off-cycle. Just let it dry completely before sticking it back on the fridge, and if it\u2019s a custom one and you notice a little fade, hit us up \u2014 we can add that extra epoxy coat for next time, or help you order a new one to replace it.<\/p>\n

<\/p>\n

If you\u2019re here because you\u2019re looking for acrylic fridge magnets for your business, your wedding favors, your kid\u2019s school fundraiser, or just for fun, we make custom magnets that hold up way better on your fridge than in the dishwasher. We can make them any size, any design, any shape \u2014 from tiny mini magnets to big, bold ones that stand out on any fridge. If you want to chat about bulk orders, custom designs, or just ask more questions about how to keep your magnets looking good, reach out. We\u2019re here to help, no sales pressure, just real answers.<\/p>\n

Acrylic Standee<\/a> References:<\/p>\n

    \n
  1. Food-Grade Acrylic Material Properties – Society of Plastics Engineers, 2022<\/li>\n
  2. Neodymium Magnet Coating Durability – Magnet Manufacturers Association, 2021<\/li>\n
  3. UV-Cured Ink Fade Resistance for Outdoor Applications – Printing Industries of America, 2020<\/li>\n
  4. Dishwasher Temperature and Chemical Impact on Plastic Materials – International Housewares Association, 2023<\/li>\n<\/ol>\n
    \n

    Wenzhou Qumange Craft Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional acrylic fridge magnet manufacturers in China. Welcome to wholesale bulk customized acrylic fridge magnet at competitive price from our factory. If you have any enquiry about pricelist and free sample, please feel free to email us.
    Address: Room 802, Building A1, Yuehu Light Industrial Park, Taishun County, Wenzhou City, Zhejiang Province, China
    E-mail: 13806616181@139.com
    WebSite:     https:\/\/www.qmgcraft.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, it\u2019s Sam from the acrylic fridge magnet supply team \u2014 and if you\u2019ve ever … Can acrylic fridge magnets be used on a dishwasher?<\/span>Read more<\/a><\/p>\n","protected":false},"author":324,"featured_media":545,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[508],"class_list":["post-545","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-acrylic-fridge-magnet-4d8f-d011f7"],"_links":{"self":[{"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/posts\/545","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/users\/324"}],"replies":[{"embeddable":true,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/comments?post=545"}],"version-history":[{"count":0,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/posts\/545\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/posts\/545"}],"wp:attachment":[{"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/media?parent=545"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/categories?post=545"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.mrashitey.com\/blog\/wp-json\/wp\/v2\/tags?post=545"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}