{"id":493,"date":"2026-09-29T05:40:54","date_gmt":"2026-09-28T21:40:54","guid":{"rendered":"http:\/\/www.mrashitey.com\/blog\/?p=493"},"modified":"2026-09-29T05:40:54","modified_gmt":"2026-09-28T21:40:54","slug":"what-causes-a-check-valve-to-fail-4dfe-6ba033","status":"publish","type":"post","link":"http:\/\/www.mrashitey.com\/blog\/2026\/09\/29\/what-causes-a-check-valve-to-fail-4dfe-6ba033\/","title":{"rendered":"What causes a check valve to fail?"},"content":{"rendered":"

Hey folks, if you\u2019ve ever worked with fluid systems\u2014whether that\u2019s in plumbing, manufacturing, oil and gas, or even food processing\u2014you know check valves are the unsung heroes keeping things running smoothly. They\u2019re the ones that stop backflow, prevent messes, and save you from headaches like pipe bursts or contaminated batches. But here\u2019s the thing: even the toughest check valves don\u2019t last forever. As a check valve supplier, I\u2019ve spent years hearing from clients who\u2019ve had a valve fail out of nowhere, and it\u2019s almost never just \u201cbad luck.\u201d Most failures come down to specific, avoidable issues that we see time and time again. Today, I\u2019m breaking down exactly what causes a check valve to die early, so you can keep your systems from hitting a wall. Check Valve<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the most common culprit I see: poor installation. I know, I know\u2014installation sounds basic, but you\u2019d be shocked how many people skip the basics and wonder why their valve is leaking or stuck within months. Check valves aren\u2019t one-size-fits-all for mounting, and getting that wrong is a death sentence. For example, swing check valves (super common in horizontal pipes) are meant to be installed with the hinge pin parallel to the flow direction. If someone flips it 90 degrees and mounts it in a vertical pipe, the disc can\u2019t swing open and close properly\u2014it\u2019ll either get wedged shut or swing so hard it breaks. I had a client last year who installed a spring check valve backwards because their contractor didn\u2019t check the arrow marking. The flow pushed the spring the wrong way, overcompressing it until the spring snapped within two weeks. Also, making sure the pipe is clean during installation is huge. If you leave metal shavings, pipe dope, or debris in the line, that stuff can get under the disc or wedge in the seat\u2014even a tiny particle is enough to stop the valve from sealing tight, leading to constant backflow and wear. Another installation mistake? Not accounting for pipe stress. If the pipe is misaligned and pulling on the valve body, that can crack the housing or warp the seat over time, leading to leaks that get worse the longer the system runs.<\/p>\n

Next up, material incompatibility. This is a less obvious one but it\u2019s the silent killer of check valves, and it\u2019s something I talk about with every new client. Every valve part\u2014body, disc, seat, spring\u2014needs to be matched to the fluid it\u2019s handling and the environment it\u2019s in. Let\u2019s say you use a bronze check valve for a system with saltwater. Bronze and saltwater don\u2019t mix well\u2014corrosion sets in fast, eating away at the seat and disc until they\u2019re too pitted to seal. I\u2019ve seen this with a coastal municipal water client who used standard bronze valves instead of marine-grade bronze; within 18 months, 30% of their valves had corroded seats that caused backflow contamination. Or take EPDM seats: if you put EPDM in a system with petroleum-based fluids, it swells up, turns mushy, and can\u2019t create a tight seal. Even extreme temperatures can mess this up. A lot of cheap check valves use standard rubber parts that harden or crack when exposed to high heat (like in boiler lines) or get brittle in cold temperatures, causing the disc to fail to close properly. Cutting corners on material specs to save a few bucks always ends up costing way more in repairs or replacements down the line.<\/p>\n

Then there\u2019s wear and tear from operation\u2014this is the \u201cnormal\u201d failure, but even this can be accelerated by bad habits. Check valves open and close with every cycle of flow, right? So every time fluid moves forward, the disc or spring moves, and over time, that causes friction. The most common wear spots are the seat and the disc sealing surface. If the valve is opening and closing constantly (like in a system with frequent flow starts and stops), that wear happens faster. One thing that speeds this up? Water hammer. Oh, water hammer is a huge one I see all the time. When flow stops suddenly, the pressure spike slams the disc against the seat so hard it chips or cracks both. That damage creates gaps, so backflow starts happening, which then makes the valve slam even harder the next time\u2014creating a vicious cycle that usually ends with a broken disc or a destroyed seat within a year or two. I had a client in the food and beverage industry who didn\u2019t have water hammer arrestors on their pasteurization lines; their swing check valves were slamming so often that 50% needed replacement every 12 months. Another operational factor: excessive pressure or flow. If a valve is rated for 100 PSI and you\u2019re running it at 150 PSI every day, the spring will compress too much, the disc will get forced against the seat harder than it\u2019s designed for, and the body could even crack under the pressure. Same with flow rates that are way higher than the valve\u2019s rating\u2014fluid moving too fast will beat up the disc, causing it to wobble or get damaged over time.<\/p>\n

Contamination in the system is another big one, and it\u2019s something that\u2019s often tied to maintenance, not the valve itself. Let\u2019s be real, even if you install the right valve with the right materials, if your system has constant debris, that valve isn\u2019t going to last. I\u2019m talking about things like pipe scale, rust, sand, or even small bits of plastic from old pipes. That stuff can get caught between the disc and seat, keeping the valve from sealing. Even tiny debris particles act like sandpaper, grinding away at the sealing surfaces every time the valve moves. One of my manufacturing clients had a problem with their check valves failing every 6 months, and it turned out their process line was shedding plastic residue from old hoses. We installed a strainer upstream of the valves, and suddenly their valve life jumped to 3+ years. Sludge or sediment is even worse\u2014if it builds up in the valve body, it can cause the disc to get stuck in the open position, which means the check valve does nothing at all, leading to backflow that can wreck the whole system. I see this a lot in old plumbing systems where mineral buildup is common; the disc gets covered in limescale and can\u2019t swing shut, so you end up with raw sewage backflow into clean lines.<\/p>\n

Wait, can I forget about spring failure? No, that\u2019s a specific issue that\u2019s super common. Most check valves use springs to help the disc close quickly, especially in low-flow systems. Springs can fail for a bunch of reasons: material corrosion (like if the spring is made of cheap steel instead of stainless steel in corrosive fluids), excessive compression from overpressure, or just metal fatigue from thousands of open\/close cycles. If the spring breaks or loses tension, the disc won\u2019t close fast enough, so backflow happens. I once had a client who was using generic steel springs in a chemical processing line; the acid in the fluid ate through the springs in 3 months, and their whole production line was shut down waiting for replacement valves. Spring material is non-negotiable, and it\u2019s one of the things we always go over with clients when we recommend a valve.<\/p>\n

Another thing that people don\u2019t talk about enough: misapplication of valve type. There are so many different check valves out there, and using the wrong one for your system is a setup for failure. Let\u2019s say you use a lift check valve in a horizontal pipe\u2014wait, lift check valves are designed for vertical flow, right? Because the disc lifts straight up when flow moves, and in a horizontal pipe, gravity will make the disc fall and jam sideways, so it can\u2019t seal. Or a dual-plate check valve in a system with solid particles\u2014those thin plates can bend or get wedged between the pipe and seat, leading to leaks. Swing check valves are great for most general applications, but if you need fast closure to stop water hammer, a spring check valve or a stop-check valve is a way better choice. I had a client who tried to use swing check valves on a pump discharge line that cycled on and off every 5 minutes; the slamming was breaking the discs, so we switched them to spring-assisted check valves, and that problem went away immediately. Picking the right valve for your specific flow, pressure, and system needs is half the battle.<\/p>\n

Now, before I wrap this up, let\u2019s be clear: not all check valve failures are avoidable. Even the best valve will wear out eventually, just from normal use. But 80% of the failures I see as a supplier are preventable\u2014they come from skipping steps, cutting corners on materials, or just not doing your homework when installing or operating the valve. The good news is that catching these issues early can save you a ton of money in repairs, downtime, and even product loss. If you\u2019re dealing with check valves that keep failing, or you\u2019re looking to upgrade your system to avoid future issues, feel free to reach out. We work with all kinds of industries to recommend the right valve type, materials, and installation tips to keep your system running smoothly for years. No generic solutions\u2014just tailored advice for what you actually need.<\/p>\n

<\/p>\n

Don\u2019t wait for a valve to fail and shut down your whole operation. Let\u2019s talk through your system, figure out what\u2019s causing the problem, and get you the right check valve that\u2019ll hold up.<\/p>\n

Butterfly Valve<\/a> References:<\/p>\n